| NF 416 Cylindrical Roller Bearing | Static Load Rating:222,000 N; Factor fo:15.8; Limiting Speed - Grease:2,000 rpm; Fillet Radius/Chamfer:2.1 mm; D:310 mm; da (min):209 mm; d:200 mm; Dynamic Load Rating:202,000 N; Radial Clearance:0.063 to 0.117 mm; Bore Type:Cylindrical Bore; |
| NUP 2319 Cylindrical Roller Bearing | Basic Number:30213; Basic static load rating (C0):156 kN; Noun:Bearing; Precision Class:Standard; ra max.:2 mm; Da(max):110; Category:Tapered Roller Beari; Bore:2.559 Inch | 65 Mill; Size (mm):65x120x24.75; |
| NU 324ECM Cylindrical Roller Bearing 120x260x55mm | d:320 mm; r min.:4 mm; Bearing number:24064RK30; Brand:KOYO; C:160 mm; da min.:338 mm; ra max.:3 mm; Basic static load rating (C0):4600 kN; Size (mm):320x480x160; (Oil) Lubrication Speed:710 r/min; |
| QJ232 160*290*48 Bearings | Inner Width (Bi):70.0000; Bore Diameter (mm):70; Bearing number:GEG70ET-2RS; Spherical Diameter (dk or Dk):105.000; Mis-alignment Angle (a deg.):16; Dynamic Load Rating (Cr):705,000; Weight (g):3,010.00; Outer Width (Bo):45.0000; Max. shaft corner radius, or 45 deg. chamfer (ch1):1.000; Material:Inner ring and outer; |
| SL18 2992 Full Complement Cylindrical Roller Bearing 460x620x95mm | Weight:0,64 Kg; ra max.:0,15 mm; Basic static load rating (C0):0,125 kN; D1:8,5 mm; B:3,5 mm; Width (mm):3,5; C1:0,9 mm; Da max.:5,8 mm; Basic dynamic load rating (C):0,38 kN; (Grease) Lubrication Speed:62 000 r/min; |
| NU218E Cylindrical Roller Bearing 90x160x30mm | Calculation factor (e):0,45; Db:68 mm; db min:39,5 mm; Size (mm):31.75x73.025x22.225; D:73,025 mm; T:22,225 mm; Basic dynamic load rating (C):55 kN; Calculation factor (Y0):0,73; a:17,1 mm; d:31.75 mm; |
| NU400 Cylindrical Roller Bearing 45x120x29mm | Weight:29.100 kg; ra1 (max):3 mm; d:130 mm; db (max):164 mm; D:280 mm; Da (max):262 mm; ra (max):3 mm; db (min):148 mm; Enclosure:Open; Fillet Radius/Chamfer:4 mm; |
| NN3009K/P4 Roller Bearing | Width (mm):71; Bore Diameter (mm):100; Angle:2 °; dk:135 mm; d:100 mm; Bearing number:GEH100HT; Outer Diameter (mm):150; Brand:LS; r1 min.:1 mm; r min.:1 mm; |