| NJ324 Cylindrical Roller Bearing 120*260*55mm | (Oil) Lubrication Speed:8100 r/min; Bearing number:SS 6011; (Grease) Lubrication Speed:6480 r/min; Width (mm):18; D:90 mm; Basic static load rating (C0):20,776 kN; d:55 mm; B:18 mm; Bore Diameter (mm):55; C:18 mm; |
| FC6692340A Bearing | Bore Diameter (mm):37; Bc:27 mm; Fw:37 mm; Brand:KBC; Outer Diameter (mm):42; Weight:0.025 Kg; Bearing number:K374227PCSP; Basic dynamic load rating (C):28 kN; Basic static load rating (C0):57 kN; (Grease) Lubrication Speed:7500 r/min; |
| NNC 4928 CV Full Complement Cylindrical Roller Bearing 140x190x50mm | C0 - Static Load:113000 lb; Dimension R:0.35 in; Dimension S:4.570 in; Engineering Group:Mounted Bearing; e - Geometry Factor:0.24; Dimension C:5.98 in; Dimension D Min:12.56 in; Eng Internal Radial Clearance - Max:0.0047; Y1 - Geometry Factor:2.85; Oil Lubrication - M/N Seal:1200 rpm; |
| NU209EM Roller Bearing | T:25,4 mm; (Grease) Lubrication Speed:3200 r/min; Weight:0,858 Kg; Outer Diameter (mm):112,712; Basic static load rating (C0):155 kN; da min.:83 mm; Size (mm):73.817x112.712x25.4; db min:81 mm; Calculation factor (e):0,49; B:25,4 mm; |
| SL185015 Bearing 75x115x54mm | Fillet Radius/Chamfer:3 mm; Axial Load Factor Y1:2.03; Limiting Speed - Grease:2,000 rpm; Limiting Speed - Oil:2,700 rpm; Center Guidance:Floating Steel Ring; Weight:22.600 kg; ra (max):2.5 mm; Da (max):246 mm; Enclosure:Open; Groove Width A:14 mm; |
| NJ417 Cylindrical Roller Bearing 85*210*52mm | Seal:TA308; A3:150 mm; C0 Static Load Rating:102; A:90.00 mm; C1 Dynamic Load Rating:113; N1:20.00 mm; G:M12; L:205.00 mm; Jmin:165 mm; End Cover1:EC510-608; |
| Bearing Inner Bush Bearing Inner Ring L180RV2603 | Angle:6 °; d:25,4 mm; Bore Diameter (mm):25,4; da min.:27,5 mm; Bearing number:GEZ100ES-2RS; B:22,23 mm; r1 min.:0,3 mm; ra max.:0,3 mm; Da min:35,2 mm; Weight:0,12 Kg; |
| NN 3017 KTN9/SP Cylindrical Roller Bearing 85x130x34mm | G1 - Heat Generation Factor (Roller-Raceway)5:293; Series:495; G2 - Heat Generation Factor (Rib-Roller End):164; e - ISO Factor3:0.44; K - Factor2:1.31; D:5.3750 in; Design Units:Imperial; D1 - Flange Outer Diameter:5.5890 in; C - Cup Width:0.8750 in; Cg - Geometry Factor6:0.125; |