| SL18 2226 Full Complement Cylindrical Roller Bearing 130x230x64mm | Bearing number:2309 TN9; Weight:1,25 Kg; B:36 mm; C:36 mm; Basic static load rating (C0):18,91 kN; Bore Diameter (mm):45; Width (mm):36; Outer Diameter (mm):100; (Grease) Lubrication Speed:6885 r/min; Brand:ISB; |
| NU203 Cylindrical Roller Bearing 17X40X12MM | Width (mm):58; D:360 mm; Angle (α):15 °; Brand:CX; Size (mm):200x360x58; Basic dynamic load rating (C):325 kN; Weight:24,4 Kg; Bearing number:7240 CTBP4; Basic static load rating (C0):440 kN; Bore Diameter (mm):200; |
| SL18 3016 Full Complement Cylindrical Roller Bearing 80x125x34mm | C:2,5 mm; Width (mm):2,5; B:2,5 mm; d:5 mm; Outer Diameter (mm):8; Basic dynamic load rating (C):0,218 kN; Brand:ZEN; Size (mm):5x8x2.5; Basic static load rating (C0):0,09 kN; Bore Diameter (mm):5; |
| NUP205E.TVP2 Cylindrical Roller Bearing | Bearing number:K 40x46x17; Fw:40 mm; Ew:46 mm; Basic dynamic load rating (C):29 kN; Outer Diameter (mm):46; Basic static load rating (C0):49,5 kN; Bore Diameter (mm):40; Weight:0,0452 Kg; Bc:17 mm; Brand:NBS; |
| SL18 2217 Full Complement Cylindrical Roller Bearing 85x150x36mm | Da - Cup Frontface Backing Diameter:343.41 mm; G2 - Heat Generation Factor (Rib-Roller End):212.2; Db - Cup Backface Backing Diameter:335.03 mm; G1 - Heat Generation Factor (Roller-Raceway):1554.1; Bearing Weight:14.8 Kg; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:4.8 mm; C0 - Static Radial Rating:339000 lbf; da - Cone Frontface Backing Diameter:280.92 mm; Series:LM451300; |
| NNU4921 Cylindrical Roller Bearings 105X145X40 | L:680 mm; Basic static load rating (C0):21,3 kN; d:45 mm; T1:160 mm; J:620 mm; Brand:KOYO; B:49,2 mm; Width (mm):49,2; H:100 mm; S:19 mm; |
| NJ330 Cylindrical Roller Bearing 150*320*65mm | Snap Ring:No; Outer Diameter (mm):30; Precision Class:ABEC 1 | ISO P0; Bore Diameter (mm):10; Weight:0.032 Kg; Bore:0.394 Inch | 10 Mill; Noun:Bearing; Da max.:25 mm; Outer Race Width:0.354 Inch | 9 Milli; |
| NNU4148MAW33 Bearing 240x400x160 Mm | Mass:1.01 kg; db max.:59 mm; e:0.35; Bore Diameter (mm):45; Characteristic cage frequency, FTF:0.41 Hz; Y0:0.96; Fatigue limit load, Cu:15.4 kN; Brand:NTN; Characteristic outer ring frequency, BPF0:6.57 Hz; Inventory:0.0; |