| SL18 5052 Full Complement Cylindrical Roller Bearing 260x400x190mm | l2 max.:18 mm; r min.:0,5 mm; l3 min.:54,5 mm; Thread (G):M16×1,5; d2:22 mm; Bearing number:SQD16; D:38 mm; C:15 mm; Brand:LS; L:76,3 mm; |
| SL18 5024 Full Complement Cylindrical Roller Bearing 120x180x80mm | Weight:2,36 Kg; Brand:CX; d:70 mm; D:125 mm; B1:48 mm; Basic dynamic load rating (C):103 kN; Bearing number:7214 B-UO; Bore Diameter (mm):70; Width (mm):48; Basic static load rating (C0):101 kN; |
| NJ244 Cylindrical Roller Bearing 220*400*65mm | Width (mm):44,45; Reference speed:4500 r/min; da - max.:60 mm; Calculation factor - Y0:0.8; Category:Bearings; Minimum Buy Quantity:N/A; Da - min.:89 mm; d:49.212 mm; Bore Diameter (mm):114,3; d1:79.3 mm; |
| 81217-TV Bearing 85x125x31mm | e:0.55; Y2:1.1; Product Group:B04334; Weight / Kilogram:1.094; Basic static load rating (C0):147 kN; Min operating temperature, Tmin:-40 °C; d:41,275 mm; Calculation factor (e):0,55; Basic dynamic load rating (C):109 kN; ra max:3.5 mm; |
| 81104 TN Bearing | Outer Diameter (mm):65; Bearing number:35BWD19E; D:65 mm; Size (mm):35x65x37; d:35 mm; ℓ:51 Tolerance h14; B:37 mm; Weight:0,48 Kg; C:37 mm; Bore Diameter (mm):35; |
| NU2314E Cylindrical Roller Bearing 70x150x51mm | Inner Race Width:0 Inch | 0 Millimete; da min.:7 mm; Outer Diameter (mm):19; Brand:NTN; Size (mm):5x19x6; Width (mm):6; operating temperature range:-40 to 120 ºC; Product Group:B00308; Weight / Kilogram:0; UNSPSC:31171504; |
| NU2226E.TVP2 Cylindrical Roller Bearings 130*230*64 | (Grease) Lubrication Speed:950 r/min; d:200 mm; Weight:41,6 Kg; Size (mm):200x340x112; Basic static load rating (C0):2360 kN; B:112 mm; Bore Diameter (mm):200; d1:180 mm; Outer Diameter (mm):340; Basic dynamic load rating (C):1380 kN; |
| 89330-M Bearing 150x250x60mm | ID Chamfer Angle (B deg.):30; Housing Bore Dia. (Dh):10 +0.015 / +0; Wall Thickness (S3):1.005; Shaft Dia., Nominal (d):8.0000; Bearing Length Tolerance (B tol.) - +0 / -0.30:+0 / 0.30; Brand:AST; ID Chamfer Length (Ci):0.300; Bore Diameter (mm):8; Outer Diameter (mm):10; Shaft Size (ds) - 8 -0.013 / -0.028:8 0.013 / 0.028; |