| N 217 Cylindrical Roller Bearing | B:5 mm; D:19 mm; Width (mm):5; Bearing number:61800; Outer Diameter (mm):19; d:10 mm; Brand:CRAFT; C:5 mm; Bore Diameter (mm):10; Size (mm):10x19x5; |
| 60RIJ249 Bearing 152.4×266.7×61.91mm | Housing Bore Dia. (Dh) - 50 +0.025 / -0:50 +0.025 / 0; Bearing Type:straight; Wall Thickness (S3):2.500; Bearing Length, Nominal (B):50.000; Bearing number:ASTT90 4550; Shaft Size (ds) - 45 -0.080 / -0.105:45 0.080 / 0.105; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Outside Diameter, Nominal(Do):50.000; Bearing Bore after Mounting (di) - 45 +0.062 / -0:45 +0.062 / 0; Bore Diameter (mm):45; |
| NUP2208-E Cylindrical Roller Bearing | C:74 mm; Weight:44,5 Kg; r min.:4 mm; Basic dynamic load rating (C):345 kN; Bore Diameter (mm):300; d:300 mm; Outer Diameter (mm):460; r1 min.:1,5 mm; Size (mm):300x460x74; a:196,4 mm; |
| N209E.TVP2 CYLINDRICAL ROLLER BEARING | (Grease) Lubrication Speed:240 r/min; Brand:NACHI; Calculation factor (e):0,37; B:388 mm; Outer Diameter (mm):1090; r min.:9,5 mm; Calculation factor (Y1):1,82; Weight:1640 Kg; Basic dynamic load rating (C):17900 kN; Basic static load rating (C0):25100 kN; |
| SL185022 Bearing 110x170x80mm | Enclosure:Open; ra1 (max):2 mm; db (min):112 mm; Limiting Speed - Oil:3,800 rpm; r1:2.1 mm; dd (min):130 mm; Da (max):168 mm; Static Load Rating:335,000 N; Radial Clearance:0.050 to 0.085 mm; ra (max):2 mm; |
| SL18 5012 Full Complement Cylindrical Roller Bearing 60x95x46mm | Basic static load rating (C0):14,8 kN; r1 min.:0.3 mm; Limiting Speed - Grease:10,000 rpm; Da2 (max):45 mm; Angle (α):30 °; Da max.:45 mm; Weight:0.091 Kg; Limiting Speed - Oil:13,000 rpm; Brand:NACHI; Outer Diameter (mm):47; |
| 567079B Cylindrical Roller Bearing (Without Outer Ring) 36x54.3x22mm | T:23,75 mm; Basic dynamic load rating (C):99 kN; (Grease) Lubrication Speed:3400 r/min; Width (mm):23,75; B:22 mm; C:19 mm; Outer Diameter (mm):110; a:22 mm; Brand:CX; Weight:0,88 Kg; |
| SL014972/NNC4972V Full-complement Cylindrical Roller Bearings | D:14.5000 in; r - Cup Frontface To Clear Radius2:0.06 in; Y1 - ISO Factor5:1.68; Y - ISO Factor1:1.49; K - Factor3:1.45; Design Units:Imperial; Y2 - ISO Factor6:2.5; G2 - Heat Generation Factor (Rib-Roller End):128; Da - Cup Frontface Backing Diameter:13.21 in; G1 - Heat Generation Factor (Roller-Raceway)7:1150; |