| No. | Brand | Q | n | h | C | T | M | X | I |
| J-1012 | koyo | - | - | - | - | - | - | - | - |
| PC56 | Komatsu | - | - | - | - | - | - | - | - |
| 1.5 | - | - | - | - | - | - | - | - | - |
| 12inch | - | - | - | - | 25 mm | - | - | - | - |
| T6 | - | - | - | - | 18 mm | - | - | - | - |
| Audi:A4,A5,A6,Q5,A7 | - | - | - | - | - | - | - | - | - |
| EN300 | - | - | - | - | - | - | - | - | - |
| 5 | INA | - | - | - | - | - | - | - | - |
| 1mm | INA | - | - | - | - | - | - | - | - |
| G1012KLLB | FAFNIR | - | - | - | - | - | - | - | - |
| 3200-BB-2RSR-TVH | fag | - | - | - | 24 mm | - | - | - | - |
| 6002-2RS | - | - | - | - | 21,000 mm | - | - | - | - |
| ZCS5400 | Rexnord | - | - | - | 86 mm | - | - | - | - |
| 23234 | - | - | - | - | - | 78 mm | - | - | - |
| displacement160cc-800cc | - | - | - | - | 65 mm | - | - | - | - |
| 1050 | - | - | - | - | - | - | - | - | - |
| 6 | NSK | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | 18,2 mm | - | - | - | - |
| 370 | koyo | - | - | - | - | - | - | - | - |
| 2523 | Bower | - | - | - | - | - | - | - | - |
| UX28 | - | - | - | - | - | - | - | - | - |
| 17x30x7mm | - | - | - | - | 232 mm | - | - | - | - |
| PC200-8 | - | - | - | - | - | - | - | - | - |
| 2W-400-40P | - | - | - | - | - | - | - | - | - |
| 510050 | Timken | - | - | - | - | - | - | - | - |
| NU2305E.TVP2 Cylindrical Roller Bearing | C1 max:31 mm; d:50 mm; Brand:LS; Bearing number:SA50ET-2RS; r min.:0,6 mm; l1 min.:104 mm; Basic dynamic load rating (C):275 kN; Angle:6 °; l7 min.:60 mm; B:35 mm; |
| 6 mm x 19 mm x 6 mm NCF 2964 CV Full Complement Cylindrical Roller Bearing 320x440x72mm | Bore Diameter (mm):65; d:65 mm; B:23 mm; Outer Diameter (mm):120; Size (mm):6 mm x 19 mm x 6 mm ; Brand:FBJ; Width (mm):23; Basic dynamic load rating (C):84 kN; (Grease) Lubrication Speed:5300 r/min; Weight:1,07 Kg; |
| 81218-TV Bearing 90x135x35mm | Bearing Bore after Mounting (di):50.23 / 50.08; Bearing Type:steel with bronze; Shaft Dia., Nominal (d):50.0000; Bore Diameter (mm):50; Shaft Size (ds) - 50 +0 / -0.039:50 +0 / 0.039; ID Chamfer Angle (B deg.):45; Lube Hole Dia. (dl):8.000; ID Chamfer Length (Ci):0.600; Housing Bore Dia. (Dh) - 55 +0.030 / -0:55 +0.030 / 0; Bearing Length, Nominal (B):50.000; |
| NU2236E.M1 Cylindrical Roller Bearings | Oil lub.:24000; Bearing No.:NKS20; Basic static load rating (C0):26,7 kN; Weight:0,058 Kg; Bearing number:NKS20; C:20 mm; Outer Diameter (mm):32; Basic dynamic load rating (C):24,4 kN; Size (mm):20x32x20; Fw:20 mm; |
| RN311M Cylindrical Roller Bearing | Dimension H:4.3 in; Dimension T:20.0 in; Note:This product line wa; Cor - Static Load Rating:186142 lbf; Support Type:Round Flange; Seal Type:High Temperature Pac; Ca - Axial Load Rating:8183 lbf; Maximum Speed:1220 rpm; Cr - Dynamic Load Rating:117800 lbf; Dimension P:1.1 in; |
| NU315 Cylindrical Roller Bearing 75*160*37mm | Bearing number:QJ224C3U35K; Width (mm):40,000; B:40,000 mm; D:215,000 mm; Bore Diameter (mm):120,000; C:40,000 mm; d:120,000 mm; Brand:NTN; Outer Diameter (mm):215,000; Size (mm):120x215x40; |
| NJ415-M1 Cylindrical Roller Bearing 75x190x45mm | Da max.:78 mm; Size (mm):68x82x35; Width (mm):35; Bearing number:TAF 688235; Basic static load rating (C0):166 kN; Weight:0,35 Kg; Basic dynamic load rating (C):72 kN; Brand:IKO; Outer Diameter (mm):82; Fw:68 mm; |
| NCF 2917 CV Full Complement Cylindrical Roller Bearing 85x120x22mm | Da max:22 mm; rmin:0,3 mm; Cr:2430 N / Dynamic loa; Brand:FAG; Bore Diameter (mm):15; da min:17 mm; nG:14000 1/min / Limiti; C0r:1960 N / Static load; α:25 ° / Angle; D:24 mm; |
70 mm x 110 mm x 20 mm N1016M Bearing Video
7014 | Angular Contact Ball Bearing | NTN - Misumi
Angular Contact Ball Bearing - Single Row or Double Row (NTN) of NTN,7014, Check out the variety of configurable, Angular Contact Ball Bearing - Single Row
NTN 7014 bearings | 70x110x20mm - Nodes bearing
NTN 7014 bearing, single row angular contact ball bearings, Dimensions:70mm x 110mm x 20mm, Dynamic Load Rating: 42.5kN, Static Load Rating: 39.5kN
7014.CVUJ74 Ball bearings : NTN-SNR, Industry Solutions
7014.CVUJ74 Ball bearings on NTN-SNR catalog, Industry Solutions manufacturer for High precision angular contact ball bearings market
NTN angular contact ball bearing 7014 NTN precision bearing
NTN angular contact ball bearing 7014 NTN precision bearing has high precision and long life in use. It is made in Japan, large ready stock
NTN - 7014 - Motion Industries
NTN 7014. Angular Contact Bearing - 70 mm Bore, 110 mm OD, 20 mm Width, Open, Without Snap Ring, 30 ° Contact Angle
7014 - NTN Bearing Finder
Browse Item # 7014, Single Angular Contact Ball Bearings - Open Type in the NTN Bearing Corp. of America catalog including Item #,Item Name,Description
NTN 7014 Bearing|Size:70 * 110 * 20
We specialize in supplying original NTN 7014 bearings and provide customers with NTN 7014 bearing size, specifications and drawings for customer reference
Original 7014 bearing - NTN 7014 bearing, 70x110x20
Angular contact ball bearings 7014. Bearing number : 7014. Size (mm) : 70x110x20. Brand : NTN. Bore Diameter (mm) : 70. Outer Diameter (mm) : 110