| NNU4924 Cylindrical Roller Bearings 120X165X45 | Db(min):-; d:360 mm; C:82 mm; Oil lub.:1100; Fw:405 mm; Basic dynamic load rating (C):1120 kN; r(min):5; Cr:1410; Bearing No.:NUP1072; B2:-; |
| NCF 2936 CV Full Complement Cylindrical Roller Bearing 180x250x42mm | Static Load Rating:69,000 N; Da (max):91.5 mm; Radial Clearance:0.045 to 0.070 mm; Dynamic Load Rating:75,500 N; ra (max):1.5 mm; Limiting Speed - Oil:8,000 rpm; ra1 (max):1.5 mm; Configuration:Single Row; db (min):43.5 mm; Weight:1.050 kg; |
| NU415 Cylindrical Roller Bearing 75x190x45mm | Bearing number:SI5E; Bore Diameter (mm):5; Bore Dia (d):5.0000; Width (B):6.0000; Static Load Rating (Cor):8,100; Body End Flats (W):10.000; Thread Size (G):M5; Width (mm):6; Mis-alignment Angle (a deg.):13; Bore Center to End of Rod (h):30.000; |
| SL182212 Bearing 60x110x28mm | C0 - Static Load:31900 lb; Weight:17.0 lb; Dimension L:3.29 in; Dimension RA:0.16 in; Oil Lubrication - M/N Seal:2200 rpm; Bearing Number:22211; Shaft Tolerance:0.0015 in; Grease Lubrication - M/N Seal:2200 rpm; Eng Internal Radial Clearance - Max:0.0026; Dimension J (Bolt Size):0.625 in; |
| NJ2308 Cylindrical Roller Bearing 40*90*33mm | S:4 mm; Calculation factor (Y):1; Basic dynamic load rating (C):133 kN; Outer Diameter (mm):110; (Grease) Lubrication Speed:3 300 r/min; Da min:93 mm; r2 min.:2,5 mm; r min.:3 mm; Basic static load rating (C0):188 kN; Weight:1,08 Kg; |
| NJ 215 Cylindrical Roller Bearing | Bore Diameter (mm):30; Brand:Timken; Basic dynamic load rating (C):42,8 kN; Outer Diameter (mm):72; C:19 mm; D:72 mm; B:19 mm; d:30 mm; Bearing number:306WDD; Size (mm):30x72x19; |
| NUP207 Cylindrical Roller Bearing 35x72x17mm | db min:57 mm; Bore Diameter (mm):50; Weight:0,39 Kg; Basic dynamic load rating (C):44,9 kN; d1:62,3 mm; (Grease) Lubrication Speed:19 000 r/min; ra max.:1 mm; Bearing number:E 250 /S/NS /S 7CE1; D:90 mm; da min.:57 mm; |
| SL01 4940 Full Complement Cylindrical Roller Bearing 200x280x80mm | Calculation factor f1:0.99; Brand:SKF; Mass bearing:0.065 kg; Preload class C - GC:430 N; Basic static load rating - C0:3.9 kN; r3,4 - min.:0.3 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor - fHC:1.01; Attainable speed for oil-air lubrication:75000 r/min; Preload class B:98 N/micron; |