| 575037 Bearings 679.45x901.7x552.45mm | A1:27 mm; N:M14; H:47.6 mm; J:80 mm; Designation of bearing:UC207-23G2T04; Dz:80 mm; Designation of housing:PA207N-; G:M6x1; H1:13 mm; T min.:-40 °C; |
| 537903 Bearings 500x720x420mm | Unit, Type:Plummer Block; Surface Treatment:No; Unit Body Material:Gray Cast Iron (FC 2; Plummer Block Type:Cutting in Two; Width a(mm):255; Length b(mm):70; Plummer Block Dia., Type:Standard Shape; Bearing Inner Dia. Shape:Cylindrical Bore; Width w(mm):155; |
| 802104.H122BA Bearing 406.4x546.1x288.925mm | d:25 mm; Characteristic inner ring frequency, BPFI:4.39 Hz; Fatigue limit load, Cu:0.5 kN; Characteristic rolling element frequency, BSF:3.66 Hz; Mass:0.23 kg; da max:35 mm; Min operating temperature, Tmin:-25 °C; ra max:1 mm; Static load, C0:10.9 kN; Nlim (grease):12,000 rpm; |
| HM266449DW/410/410D Bearing 384.175x546.1x400.05mm | S:27.7 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; Weight:3.36 kg; Designation of housing:FA211-; T max.:200 °C; d1:74.5 mm; s1:48.4 mm; A2:68.6 mm; C:43.55 kN; |
| 575032 Bearings 355.6x482.6x269.875mm | Unit Body Material:Cast Iron; Surface Treatment:No; Accessory:No Cover; Bearing Unit, Type:Square flange shape; Machining:No; Unit, Type:Insert Bearing Unit; d:40; Diameter series symbol:Medium Load; Days to Ship:Quote; |
| 549349 Bearings 460x760x520mm | Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Part Number:6210; Bearing I.D. d(mm):50; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):147; RoHS:6; |
| 802052 Bearing 347.662x469.9x292.1mm | da min:80 mm; Mass:0.35 kg; Static load, C0:22.6 kN; f0:16.5; Brand:NTN; Nlim (grease):6,100 rpm; Characteristic cage frequency, FTF:0.45 Hz; D:105 mm; Dynamic load, C:24.4 kN; Da max:100 mm; |
| 802006.H122BA Bearing 482.6x615.95x330.2mm | Material:[Carbon Steel] 52100; Category:Cam Followers; Roller Guiding Method:Retainer Type; Roller Type:Flat Type; Cam Follower Type:Standard; Unit:Metric Series; RoHS:6; Shaft:Provided; Tightening Method:Standard Type; Application:General; |