| BT190-1 DF NSK Angular contact ball bearing | B:24.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; D:145.0000 mm; Basic Dynamic Radial Load Rating C:63700 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; d:95.000 mm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals; |
| BT240-1E DB NSK Angular contact ball bearing | D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Sealed Speed Rating n3:5000 rpm; Basic Static Radial Load Rating Co:43000 N; Accessories:One Seal & Snap-Ring; B:36.50 mm; d:40.000 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:60500 N; Fillet Radius ra:1.50 mm; |
| 7028BX DF NSK Angular contact ball bearing | Appropriate attachment bolt size G:0.625 in; H:174.625 mm; P90°:82.7 kN; Cap bolt, SAE grade:8; Ca:42.799 mm; Cap bolt recommended tightening torque:298.3 N·m; Da:140 mm; H1:88.9 mm; A1:88.9 mm; RG:3/8 NPT; L:330.2 mm; da:69.85 mm; Max. speed for PosiTrac Plus seal:2150 r/min; P180°:52.5 kN; Initial grease fill:87.885 g; A2:133.35 mm; Labyrinth ring:2 x LOR 45; H2:31.75 mm; PG:1/8 NPT; |
| 6052X1 NSK Angular contact ball bearing | End plug (suffix Y):EPR 21; Pa:52.5 kN; Initial grease fill:1672.65 g; A1:190.5 mm; L:711.2 mm; Taconite seal:TER 156; Stabilizing ring:SR-38-32; Da:339.999 mm; R1:120.65 mm; PG:1/4 NPT; P60°:416 kN; Eye bolt:2 x 1/2-13 UNC; RG:1 NPT; H1:200.025 mm; Cap bolt, SAE grade:8; da:177.8 mm; H2:79.375 mm; Mass pillow block:223 kg; ba:78.581 mm; P90°:249 kN; |
| B320-3 NSK Angular contact ball bearing | R2:33.337 mm; A2:225.425 mm; P60°:345 kN; RG:3/4 NPT; Da:289.999 mm; Eye bolt:2 x 3/8-16 UNC; P180°:145 kN; Appropriate attachment bolt size G:1 in; da:176.213 mm; H1:169.875 mm; J min.:441.325 mm; A1:158.75 mm; PG:1/4 NPT; Ca:89.789 mm; Housing:SAFS 038 KA; Cap bolt:7/8-9 UNC; h:47.625 mm; J max.:488.95 mm; Cap bolt, SAE grade:8; Initial grease fill:793.8 g; |
| BA175-1 DF NSK Angular contact ball bearing | Mass lock washer:0.05 kg; d:65 mm; B:2.5 mm; M:62.5 mm; d1:79 mm; f:8 mm; d2:92 mm; |
| BA180-2E DF NSK Angular contact ball bearing | M3:26 mm; Mass locking clip:0.35 kg; M2:70 mm; M:21 mm; Hexagonal head bolt:M 24x50; Spring washer in accordance with DIN 128:A 24; B:60 mm; M1:7 mm; |
| BA150-1 DF NSK Angular contact ball bearing | F:287 mm; Limiting speed:1700 r/min; Mass bearing:80 kg; db min.:299 mm; da max.:294 mm; B:120 mm; ra max.:3 mm; D1 ≈:311.6 mm; Basic dynamic load rating C:1980 kN; da min.:258 mm; Da max.:422.6 mm; d:240 mm; Basic static load rating C0:3050 kN; Da min.:299 mm; Fatigue load limit Pu:275 kN; s max.:3.5 mm; D:440 mm; Calculation factor kr:0.16; Reference speed:1400 r/min; r1,2 min.:4 mm; |
| BA380-1 DB NSK Angular contact ball bearing | B2:90 mm; B1:356 mm; s1 max.:28.6 mm; Da max.:1062 mm; da max.:852 mm; Fatigue load limit Pu:1160 kN; d1:710 mm; ra max.:6 mm; Reference speed:380 r/min; Ca min.:7.4 mm; B:250 mm; d3:870 mm; Limiting speed:530 r/min; Basic dynamic load rating C:9500 kN; Basic static load rating C0:19300 kN; Operating clearance factor k2:0.11; db min.:778 mm; D1 ≈:993 mm; Ba min.:26 mm; B5:112 mm; |
| BA580-1 DB NSK Angular contact ball bearing | Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:4300 rpm; Basic Static Radial Load Rating Co:76500 N; Accessories:One Shield; D:100.0000 mm; d:55.000 mm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating C:66000 N; B:33.30 mm; |