| B260-51 NSK Angular contact ball bearing | Cap bolt recommended tightening torque:2467.6 N·m; Ca:107.798 mm; Taconite seal:TER 159; N1:34.925 mm; PG:1/4 NPT; A1:203.2 mm; Max. speed for Taconite seal:425 r/min; Da:359.999 mm; P150°:185 kN; J min.:571.5 mm; End plug (suffix Y):EPR 21; Eye bolt:2 x 1/2-13 UNC; Initial grease fill:2154.6 g; H2:85.725 mm; P120°:207 kN; RG:1 NPT; da:182.563 mm; Stabilizing ring:SR-40-34; S:4.763 mm; |
| BA170-3 DB NSK Angular contact ball bearing | a:10 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; h:212.5 mm; d:210 mm; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; Mass bushing:12.2 kg; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; D:230 mm; B:200 mm; |
| BA150-2 DB NSK Angular contact ball bearing | Limiting speed:28000 r/min; Reference speed:24000 r/min; Basic static load rating C0:10.6 kN; Mass needle roller and cage assembly:0.0085 kg; Ew:20 mm; U:12 mm; Basic dynamic load rating C:9.9 kN; Fatigue load limit Pu:1.25 kN; Fw:14 mm; |
| BA150-9 DF NSK Angular contact ball bearing | d1:105 mm; r1,2 min.:1.1 mm; d:55 mm; B:10.5 mm; Mass shaft washer:0.5 kg; |
| BT260-52 DF NSK Angular contact ball bearing | J:101.5 mm; Fatigue load limit Pu:0.8 kN; Basic dynamic load rating C:30.7 kN; Da:115.9 mm; Thread grub screw G2:M6; Recommended diameter for attachment bolts, inch G:0.5 in; d:40 mm; A5:23.5 mm; Housing material:Composite; T:49.9 mm; Mass bearing unit:0.88 kg; Basic static load rating C0:19 kN; Recommended diameter for attachment bolts, mm G:12 mm; A3:3.2 mm; Hexagonal key size for grub screw N:3 mm; |
| BA185-1 DF NSK Angular contact ball bearing | Keyway f:3.2 mm; Grease Speed Rating Max. n1:3600 rpm; Fillet Radius ra:1.00 mm; Preload:90 lb; X-L-O Part Number:135-47; Oil Mist Speed Rating Max. n3:6000 rpm; d:31.750 mm; Keyway e:32.6 mm; B:31.75 mm; D:68.2600 mm; Oil Speed Rating Max. n2:4500 rpm; |
| B400-3 NSK Angular contact ball bearing | Basic dynamic load rating C:12.4 kN; Static axial stiffness, preload class B:60 N/µm; db min.:44.6 mm; Number of balls z:19; Attainable speed for oil-air lubrication:56000 r/min; Ball diameter Dw:7.144 mm; Static axial stiffness, preload class C:81 N/µm; Calculation factor f2A:1; Preload class A GA:65 N; b:1.4 mm; C3:3 mm; dn:51.6 mm; Reference grease quantity Gref:2.8 cm³; rb max.:0.6 mm; |
| B260-14 NSK Angular contact ball bearing | S:4.763 mm; Labyrinth ring:2 x LOR 123; PosiTrac Plus contact element:2 x B10724-122; J max.:434.975 mm; P150°:66.7 kN; J min.:406.4 mm; L:511.175 mm; Cap bolt:4 x 3/4-10 UNC; P180°:81.4 kN; R1:101.6 mm; RG:3/8 NPT; Eye bolt:3/8-16 UNC; A2:231.775 mm; ba:71.438 mm; N1:28.575 mm; Housing:SAW 528; da:127 mm; Da:250 mm; P120°:73.8 kN; H2:60.325 mm; |
| BA170-3 DF NSK Angular contact ball bearing | B:16.00 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Sealed Speed Rating n3:7500 rpm; Basic Dynamic Radial Load Rating C:19500 N; Basic Static Radial Load Rating Co:11200 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:13000 rpm; d:30.000 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:10000 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; |
| BT240-1 DF NSK Angular contact ball bearing | B:49.21 mm; E:mm; F:102 mm; d2:85 mm; Static (Coa):316 kN; r1s (min):2.1 mm; Dynamic (Ca):211 kN; s:5.5 mm; D:150 mm; d2 (max):mm; rs (min):2.1 mm; b:mm; Pu:36.490 kN; b1:mm; |