| 320TFX01 NSK Thrust Tapered Roller Bearing | Dynamic (Cr):9 mm; d:200 mm; Grease:2760 kN; Oil:247.140 kN; Static (Cor):16.7 mm; rs (min):4 mm; Pu:1710 kN; with cylindrical bore:800 min-1; with tapered bore:1 000 min-1; B:128 mm; D:360 mm; |
| 495TFX01 NSK Thrust Tapered Roller Bearing | da min.:7 mm; ra max.:0.3 mm; Mass bearing:0.0081 kg; r1,2 min.:0.3 mm; Limiting speed:24000 r/min; Basic dynamic load rating C:2.03 kN; B:6 mm; d:5 mm; d2 ≈:8.5 mm; D:19 mm; Calculation factor f0:12.1; Calculation factor kr:0.035; D2 ≈:16.5 mm; Basic static load rating C0:0.88 kN; da max.:8.4 mm; Da max.:17 mm; Fatigue load limit Pu:0.038 kN; |
| BT190-1 DF NSK Angular contact ball bearing | B:24.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; D:145.0000 mm; Basic Dynamic Radial Load Rating C:63700 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; d:95.000 mm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals; |
| B600-15 NSK Angular contact ball bearing | B:14 mm; Attainable speed for grease lubrication:20000 r/min; da max.:43.2 mm; Preload class D GD:720 N; Fatigue load limit Pu:0.38 kN; Calculation factor fHC:1; Mass bearing:0.15 kg; Static axial stiffness, preload class C:144 N/µm; Static axial stiffness, preload class D:190 N/µm; Calculation factor f:1.06; db max.:43.2 mm; Calculation factor (single, tandem) Y2:0.87; ra max.:1 mm; D:62 mm; |
| B260-14 NSK Angular contact ball bearing | S:4.763 mm; Labyrinth ring:2 x LOR 123; PosiTrac Plus contact element:2 x B10724-122; J max.:434.975 mm; P150°:66.7 kN; J min.:406.4 mm; L:511.175 mm; Cap bolt:4 x 3/4-10 UNC; P180°:81.4 kN; R1:101.6 mm; RG:3/8 NPT; Eye bolt:3/8-16 UNC; A2:231.775 mm; ba:71.438 mm; N1:28.575 mm; Housing:SAW 528; da:127 mm; Da:250 mm; P120°:73.8 kN; H2:60.325 mm; |
| 149TFX01 NSK Thrust Tapered Roller Bearing | Eye bolt:2 x 1/2-13 UNC; A2:409.575 mm; Max. speed for Taconite seal:325 r/min; P150°:145 kN; H:474.663 mm; J max.:708.025 mm; Mass pillow block:247 kg; R1:130.175 mm; PG:1/4 NPT; Cap bolt:4 x 1-8 UNC; L:831.85 mm; R2:46.831 mm; P120°:160 kN; Stabilizing ring:2 x A8898; N1:41.275 mm; H1:241.3 mm; P90°:254 kN; Housing:SAF 052 KA; End plug (suffix Y):X-5217-2; Da:399.999 mm; |
| BT200-1E DF NSK Angular contact ball bearing | P150°:48 kN; Initial grease fill:181.44 g; End plug (suffix Y):EPR 14; P60°:141 kN; P180°:57.4 kN; Da:180 mm; R2:30.163 mm; Taconite seal:TER 112; Cap bolt, SAE grade:8; R1:65.088 mm; H2:44.45 mm; Housing:SSAFS 024 KA; Stabilizing ring:2 x 38151-24; L:387.35 mm; ba:46.831 mm; A2:222.25 mm; Mass pillow block:39.5 kg; P120°:52.5 kN; RG:3/8 NPT; H1:114.3 mm; |
| B260-51 NSK Angular contact ball bearing | Cap bolt recommended tightening torque:2467.6 N·m; Ca:107.798 mm; Taconite seal:TER 159; N1:34.925 mm; PG:1/4 NPT; A1:203.2 mm; Max. speed for Taconite seal:425 r/min; Da:359.999 mm; P150°:185 kN; J min.:571.5 mm; End plug (suffix Y):EPR 21; Eye bolt:2 x 1/2-13 UNC; Initial grease fill:2154.6 g; H2:85.725 mm; P120°:207 kN; RG:1 NPT; da:182.563 mm; Stabilizing ring:SR-40-34; S:4.763 mm; |
| BA199-1A DF NSK Angular contact ball bearing | Da:215.001 mm; RG:1/2 NPT; J1:69.85 mm; S:4.763 mm; h:51.594 mm; N1:22.225 mm; Mass pillow block:51.3 kg; Max. speed for Taconite seal:900 r/min; Initial grease fill:379.89 g; Stabilizing ring:SR-24-20; H1:133.35 mm; A2:254 mm; Taconite seal:TER 103; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 12; P90°:111 kN; P150°:66.7 kN; H:258.762 mm; J max.:368.3 mm; P120°:72.5 kN; |
| BA230-2A DF NSK Angular contact ball bearing | A1:120.65 mm; R2:30.163 mm; P180°:81.4 kN; RG:1/2 NPT; Housing:SAW 224; Stabilizing ring:SR-24-20; Cap bolt recommended tightening torque:400 N·m; P150°:66.7 kN; Appropriate attachment bolt size G:0.75 in; Bearing limiting speed:2800 r/min; J1:69.85 mm; Initial grease fill:379.89 g; dc:115.888 mm; R1:79.375 mm; Labyrinth ring (db shaft position):LOR 127; Ca:85.801 mm; P90°:111 kN; |