| 220TFX01 NSK Thrust Tapered Roller Bearing | S:0.794 mm; Attachment bolt diameter G:12.7 mm; da:42.862 mm; B:73.025 mm; A1:78.581 mm; J min.:155.575 mm; Mass bearing unit:4.22 kg; J max.:161.925 mm; s:25.4 mm; H:107.95 mm; d2:68.659 mm; A:60.325 mm; H2:31.75 mm; Basic dynamic load rating C:77 kN; Limiting speed:5300 r/min; H1:53.975 mm; L:200.025 mm; |
| B850-2 NSK Angular contact ball bearing | J max.:368.3 mm; R2:31.75 mm; End plug (suffix Y):EPR 13; Appropriate attachment bolt size G:0.75 in; Cap bolt recommended tightening torque:203.4 N·m; RG:3/8 NPT; Cap bolt:2 x 3/4-10 UNC; H2:50.8 mm; ba:42.069 mm; P60°:149 kN; Stabilizing ring:2 x SR-1522; h:45.244 mm; Housing:SAF 522; A2:165.1 mm; P90°:89 kN; Pa:12.5 kN; A1:120.65 mm; H:239.316 mm; Cap bolt, SAE grade:5; H1:125.425 mm; |
| BA150-7 DB NSK Angular contact ball bearing | h:51.594 mm; Ca:77.8 mm; H2:60.325 mm; RG:3/4 NPT; P90°:180 kN; P180°:127 kN; A2:193.675 mm; P120°:116 kN; H1:152.4 mm; Cap bolt recommended tightening torque:813.5 N·m; Stabilizing ring:SR-28-0; Da:250 mm; J min.:406.4 mm; A1:149.225 mm; P60°:301 kN; R1:87.313 mm; Eye bolt:2 x 3/8-16 UNC; J1:85.725 mm; Bearing limiting speed:3200 r/min; Labyrinth ring:2 x LOR 120; |
| 409TFX01 NSK Thrust Tapered Roller Bearing | Fillet Radius ra:1.50 mm; d:35.000 mm; D:80.0000 mm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:39700 N; B:31.00 mm; Oil Speed Rating n2:8500 rpm; |
| B725-1 NSK Angular contact ball bearing | H:65 mm; Mass bearing (including seat washer where applicable):19.5 kg; Basic static load rating C0:1460 kN; Minimum load factor A:9.3; Da max.:395 mm; D1 ≈:370 mm; da min.:409 mm; Limiting speed:110 r/min; ra max.:1 mm; Reference speed:750 r/min; d1 ≈:440 mm; r1,2 min.:1.1 mm; Fatigue load limit Pu:27 kN; d:366 mm; Basic dynamic load rating C:296 kN; D:440 mm; |
| 7960AX DF NSK Angular contact ball bearing | Limiting speed:15000 r/min; Reference speed:13000 r/min; Ew:37 mm; Basic static load rating C0:33.5 kN; U:16 mm; Fw:30 mm; Mass needle roller and cage assembly:0.027 kg; Fatigue load limit Pu:4 kN; Basic dynamic load rating C:22 kN; |
| BT240-1 DF NSK Angular contact ball bearing | B:49.21 mm; E:mm; F:102 mm; d2:85 mm; Static (Coa):316 kN; r1s (min):2.1 mm; Dynamic (Ca):211 kN; s:5.5 mm; D:150 mm; d2 (max):mm; rs (min):2.1 mm; b:mm; Pu:36.490 kN; b1:mm; |
| 710TFX01 NSK Thrust Tapered Roller Bearing | P180°:30.2 kN; Stabilizing ring:SR-15-0; R2:21.431 mm; RG:1/4 NPT; Cap bolt, SAE grade:8; H:161.925 mm; db:87.313 mm; dc:71.438 mm; Taconite seal (dc shaft position):TER 46; Housing:SAFS 215; H1:82.55 mm; h:28.575 mm; PG:1/8 NPT; Max. speed for Taconite seal:900 r/min; H2:30.163 mm; Da:130 mm; Ca:37.008 mm; Taconite seal (db shaft position):TER 79; L:285.75 mm; ba:32.544 mm; |
| BA150-1 DF NSK Angular contact ball bearing | F:287 mm; Limiting speed:1700 r/min; Mass bearing:80 kg; db min.:299 mm; da max.:294 mm; B:120 mm; ra max.:3 mm; D1 ≈:311.6 mm; Basic dynamic load rating C:1980 kN; da min.:258 mm; Da max.:422.6 mm; d:240 mm; Basic static load rating C0:3050 kN; Da min.:299 mm; Fatigue load limit Pu:275 kN; s max.:3.5 mm; D:440 mm; Calculation factor kr:0.16; Reference speed:1400 r/min; r1,2 min.:4 mm; |
| BT250-51 DB NSK Angular contact ball bearing | B2 ≈:307 mm; G1:45 mm; Fatigue load limit Pu:830 kN; d2 ≈:578 mm; da max.:577 mm; Basic static load rating C0:12500 kN; D:790 mm; Ca min.:8.7 mm; Mass bearing + sleeve:545 kg; Da min.:673 mm; s1 max.:35.1 mm; Basic dynamic load rating C:6950 kN; r1,2 min.:7.5 mm; Operating clearance factor k2:0.109; Reference speed:560 r/min; B1:295 mm; ra max.:6 mm; Limiting speed:750 r/min; da min.:512 mm; |