| BT220-3 DB NSK Angular contact ball bearing | Basic static load rating C0:6950 kN; Reference speed:750 r/min; Limiting speed:1000 r/min; Basic dynamic load rating C:4515 kN; D1 ≈:524 mm; Fatigue load limit Pu:490 kN; d2 ≈:436 mm; B:192 mm; r1,2 min.:5 mm; d:360 mm; Calculation factor Y0:2.2; Da max.:580 mm; Mass bearing:215 kg; Calculation factor Y2:3.4; Calculation factor Y1:2.3; ra max.:4 mm; K:12 mm; D:600 mm; da min.:371 mm; b:22.3 mm; |
| 6948X1 NSK Angular contact ball bearing | B:12.00 mm; D:42.0000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Static Radial Load Rating Co:5000 N; Oil Speed Rating Open/Shielded n2:20000 rpm; d:20.000 mm; Sealed Speed Rating n3:11000 rpm; Accessories:One Shield; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:9360 N; |
| BA150-2 DF NSK Angular contact ball bearing | D:130.0000 mm; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; Accessories:One Shield; B:54.00 mm; Basic Static Radial Load Rating Co:143000 N; d:60.000 mm; Grease Speed Rating n1:3400 rpm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:134000 N; |
| BA199-1A DB NSK Angular contact ball bearing | Permissible angular misalignment α:3 °; r1,2 min.:3 mm; ra max.:3 mm; Basic dynamic load rating C:117 kN; B4:18 mm; Da max.:176 mm; Calculation factor kr:0.045; Mass bearing + adapter sleeve:6.9 kg; B:43 mm; D1 ≈:162.1 mm; Basic static load rating C0:44 kN; d:80 mm; d3:120 mm; Calculation factor Y2:4.5; Ba min.:8 mm; Fatigue load limit Pu:1.93 kN; db min.:96 mm; Limiting speed:4500 r/min; |
| BA200-3E DB NSK Angular contact ball bearing | D:546.1 mm; Basic static load rating C0:16600 kN; Calculation factor Y0:2; Thrust factor K:1.24; d1 ≈:419 mm; Calculation factor Y1:2; B:400.05 mm; Calculation factor Y2:3; r1,2 min.:3.3 mm; r3,4 min.:6.4 mm; Fatigue load limit Pu:1290 kN; Comparative axial load rating CFa:278 kN; Comparative radial load rating CF:1730 kN; D1 ≈:484 mm; Mass bearing:311 kg; T:400.05 mm; Calculation factor e:0.33; |
| BT260-52 DF NSK Angular contact ball bearing | J:101.5 mm; Fatigue load limit Pu:0.8 kN; Basic dynamic load rating C:30.7 kN; Da:115.9 mm; Thread grub screw G2:M6; Recommended diameter for attachment bolts, inch G:0.5 in; d:40 mm; A5:23.5 mm; Housing material:Composite; T:49.9 mm; Mass bearing unit:0.88 kg; Basic static load rating C0:19 kN; Recommended diameter for attachment bolts, mm G:12 mm; A3:3.2 mm; Hexagonal key size for grub screw N:3 mm; |
| BA160-3E DF NSK Angular contact ball bearing | a:28.8 mm; db max.:114.8 mm; Preload class A GA:310 N; da min.:107 mm; Attainable speed for grease lubrication:10000 r/min; ra max.:1.5 mm; d2:115.4 mm; Calculation factor f2B:1.02; Fatigue load limit Pu:3.2 kN; Preload class D GD:2480 N; Calculation factor f2D:1.09; Calculation factor fHC:1.02; Ball diameter Dw:15.875 mm; d:100 mm; Mass bearing:1.06 kg; Static axial stiffness, preload class C:238 N/µm; |
| B340-2 NSK Angular contact ball bearing | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; D:9 mm; Specific static load factor K0:20 N/mm²; Mass bushing:0.001 kg; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; B:4 mm; Permissible sliding velocity v min.:0.25 m/s; d:6 mm; |
| 7940AAX DF NSK Angular contact ball bearing | P120°:44.5 kN; A1:111.125 mm; da:107.95 mm; Pa:16.7 kN; J max.:333.375 mm; H1:114.3 mm; RG:3/8 NPT; P180°:48.9 kN; A2:228.6 mm; End plug (suffix Y):EPR 14; R1:58.737 mm; Cap bolt:2 x 3/4-10 UNC; J1:60.325 mm; Cap bolt recommended tightening torque:203.4 N·m; Taconite seal:TER 114; L:387.35 mm; Da:180 mm; ba:46.831 mm; Ca:55.804 mm; R2:30.163 mm; |
| BA150-4E DF NSK Angular contact ball bearing | Preload class C GC:480 N; Preload class B GB:240 N; D:55 mm; Basic dynamic load rating C:8.84 kN; Calculation factor f2A:1; Calculation factor f1:0.99; d1:38.2 mm; Ball diameter Dw:6.35 mm; da min.:34.6 mm; rb max.:0.6 mm; Fatigue load limit Pu:0.212 kN; db min.:34.6 mm; d2:36.4 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; D2:48.1 mm; Calculation factor fHC:1.01; da max.:37.8 mm; B:13 mm; |