| B820-1A NSK Angular contact ball bearing | B:35 mm; d:55 mm; r, r1,2 min.:0.6 mm; Mass inner ring:0.12 kg; F:60 mm; |
| BA150-2A DF NSK Angular contact ball bearing | with tapered bore:2 200 min-1; rs (min):3 mm; Pu:682 kN; with cylindrical bore:1 700 min-1; Static (Cor):8.3 mm; B:73 mm; d:100 mm; D:215 mm; Dynamic (Cr):4.5 mm; Grease:842 kN; Oil:89.600 kN; |
| BT285-1 DB NSK Angular contact ball bearing | B1:52 mm; B4:18 mm; Hydraulic nut:HMV 18 E; d:90 mm; d3:120 mm; B:16 mm; d1:82.55 mm; G:M 90x2; Mass adapter sleeve assembly:0.97 kg; |
| B450-2 NSK Angular contact ball bearing | r1,2 min.:4 mm; Mass bearing:3480 kg; C:740 mm; K:12 mm; d:759 mm; r3,4 min.:4 mm; Fatigue load limit Pu:3800 kN; b:22.3 mm; B:740 mm; D:1210 mm; Basic static load rating C0:85000 kN; Basic dynamic load rating C:25500 kN; Calculation factor kr:640; D1 ≈:1053.6 mm; Design variant/feature:BC4.10/W33WI; F:885 mm; |
| BT200-1E DB NSK Angular contact ball bearing | P180°:202 kN; h:60.325 mm; Housing:SSAFS 536; Labyrinth ring:2 x LOR 147; P60°:535 kN; A1:180.975 mm; RG:3/4 NPT; H2:76.2 mm; Cap bolt:1-8 UNC; Initial grease fill:1304.1 g; Mass pillow block:197 kg; Ca:95.809 mm; Eye bolt:2 x 3/8-16 UNC; P150°:173 kN; Bearing limiting speed:2600 r/min; H1:190.5 mm; Cap bolt, SAE grade:8; P90°:320 kN; PG:1/4 NPT; A2:254 mm; |
| B500-3 NSK Angular contact ball bearing | Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:1 m/s; Specific static load factor K0:80 N/mm²; Tolerance housing:H7; B:12 mm; d:10 mm; Mass bushing:0.00062 kg; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:h9; D:12 mm; Coefficient of friction µ min.:0.06; Specific dynamic load factor K:40 N/mm²; |
| BA230-2 DB NSK Angular contact ball bearing | H:217.488 mm; P60°:119 kN; Mass pillow block:28.1 kg; Cap bolt, SAE grade:5; P120°:44.5 kN; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:900 r/min; N1:22.225 mm; A1:111.125 mm; H1:114.3 mm; S:4.763 mm; Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; Stabilizing ring:SR-20-17; Pa:13.8 kN; H2:44.45 mm; J1:60.325 mm; ba:44.45 mm; da:85.725 mm; Ca:55.804 mm; |
| BA150-7 DB NSK Angular contact ball bearing | h:51.594 mm; Ca:77.8 mm; H2:60.325 mm; RG:3/4 NPT; P90°:180 kN; P180°:127 kN; A2:193.675 mm; P120°:116 kN; H1:152.4 mm; Cap bolt recommended tightening torque:813.5 N·m; Stabilizing ring:SR-28-0; Da:250 mm; J min.:406.4 mm; A1:149.225 mm; P60°:301 kN; R1:87.313 mm; Eye bolt:2 x 3/8-16 UNC; J1:85.725 mm; Bearing limiting speed:3200 r/min; Labyrinth ring:2 x LOR 120; |
| BA580-1 DB NSK Angular contact ball bearing | Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:4300 rpm; Basic Static Radial Load Rating Co:76500 N; Accessories:One Shield; D:100.0000 mm; d:55.000 mm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating C:66000 N; B:33.30 mm; |
| BA200-3E DF NSK Angular contact ball bearing | Grease Speed Rating Open/Shielded n1:4400 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:88000 N; Fillet Radius ra:2.00 mm; d:50.000 mm; B:31.00 mm; Basic Static Radial Load Rating Co:71000 N; Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:5400 rpm; |