| BA220-2 DF NSK Angular contact ball bearing | rb max.:0.6 mm; Da max.:63.4 mm; Calculation factor f2C:1.05; Mass bearing:0.17 kg; a:14.8 mm; db max.:47 mm; db min.:44.6 mm; Preload class C GC:390 N; Preload class B GB:200 N; Ball diameter Dw:7.144 mm; d1:49.7 mm; da max.:49.1 mm; d:40 mm; r3,4 min.:0.6 mm; Calculation factor fHC:1.01; Calculation factor f2B:1.03; Number of balls z:19; d2:47.6 mm; Attainable speed for grease lubrication:36000 r/min; |
| BA170-3 DB NSK Angular contact ball bearing | a:10 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; h:212.5 mm; d:210 mm; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; Mass bushing:12.2 kg; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; D:230 mm; B:200 mm; |
| 60/560X NSK Angular contact ball bearing | d:50.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:95200 N; Grease Speed Rating n1:4000 rpm; Basic Static Radial Load Rating Co:95000 N; Accessories:No Shield, no Seal; Oil Speed Rating n2:5300 rpm; B:47.60 mm; Sealed Speed Rating n3:4000 rpm; D:110.0000 mm; |
| BA145-1 DF NSK Angular contact ball bearing | Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:122000 N; Fillet Radius ra:2.00 mm; B:52.40 mm; Grease Speed Rating n1:3800 rpm; D:120.0000 mm; Accessories:Two Seals & Snap-Rin; d:55.000 mm; Sealed Speed Rating n3:3800 rpm; Basic Dynamic Radial Load Rating C:119000 N; |
| 438TFV01 NSK Thrust Tapered Roller Bearing | a:16.4 mm; r1,2 min.:1 mm; rb max.:0.6 mm; B:13 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Fatigue load limit Pu:0.212 kN; Static axial stiffness, preload class A:71 N/µm; Calculation factor f1:0.99; Calculation factor fHC:1; Ball diameter Dw:6.35 mm; Attainable speed for oil-air lubrication:54000 r/min; C3:2.6 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; |
| BA175-1 DB NSK Angular contact ball bearing | Grease Speed Rating Open/Shielded n1:19000 rpm; Fillet Radius ra:0.30 mm; D:35.0000 mm; B:10.00 mm; Basic Dynamic Radial Load Rating C:6050 N; Accessories:Two Seals; Sealed Speed Rating n3:13000 rpm; Basic Static Radial Load Rating Co:3250 N; Oil Speed Rating Open/Shielded n2:24000 rpm; d:17.000 mm; |
| BT220-1 DB NSK Angular contact ball bearing | Fillet Radius ra:1.00 mm; d:25.000 mm; B:15.00 mm; Basic Dynamic Radial Load Rating C:16100 N; D:52.0000 mm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:13000 rpm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating Open/Shielded n1:11000 rpm; |
| BA230-2A DB NSK Angular contact ball bearing | d:40.000 mm; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:43000 N; Sealed Speed Rating n3:5000 rpm; Basic Dynamic Radial Load Rating C:60500 N; Accessories:One Seal; Grease Speed Rating n1:5000 rpm; B:36.50 mm; D:90.0000 mm; |
| B600-15 NSK Angular contact ball bearing | B:14 mm; Attainable speed for grease lubrication:20000 r/min; da max.:43.2 mm; Preload class D GD:720 N; Fatigue load limit Pu:0.38 kN; Calculation factor fHC:1; Mass bearing:0.15 kg; Static axial stiffness, preload class C:144 N/µm; Static axial stiffness, preload class D:190 N/µm; Calculation factor f:1.06; db max.:43.2 mm; Calculation factor (single, tandem) Y2:0.87; ra max.:1 mm; D:62 mm; |
| 7028BX DF NSK Angular contact ball bearing | Appropriate attachment bolt size G:0.625 in; H:174.625 mm; P90°:82.7 kN; Cap bolt, SAE grade:8; Ca:42.799 mm; Cap bolt recommended tightening torque:298.3 N·m; Da:140 mm; H1:88.9 mm; A1:88.9 mm; RG:3/8 NPT; L:330.2 mm; da:69.85 mm; Max. speed for PosiTrac Plus seal:2150 r/min; P180°:52.5 kN; Initial grease fill:87.885 g; A2:133.35 mm; Labyrinth ring:2 x LOR 45; H2:31.75 mm; PG:1/8 NPT; |