| BT240-1 DB NSK Angular contact ball bearing | d2:90 mm; rs (min):3 mm; b:12 mm; Dynamic (Ca):233 kN; F:115 mm; B:43 mm; E:165 mm; s:2 mm; r1s (min):3 mm; d2 (max):126.5 mm; Static (Coa):242 kN; D:190 mm; Pu:26.540 kN; b1:21 mm; |
| BA150-2A DB NSK Angular contact ball bearing | P60°:290 kN; h:61.913 mm; Cap bolt recommended tightening torque:271.2 N·m; Cap bolt, SAE grade:5; ba:78.581 mm; Labyrinth ring:2 x LOR 153; Max. speed for PosiTrac Plus seal:825 r/min; R2:42.069 mm; Eye bolt:2 x 1/2-13 UNC; PG:1/4 NPT; P180°:113 kN; R1:120.65 mm; Mass pillow block:170 kg; A2:273.05 mm; A1:190.5 mm; J max.:619.125 mm; Appropriate attachment bolt size G:1.25 in; Stabilizing ring:SR-38-32; |
| B600-15 NSK Angular contact ball bearing | B:14 mm; Attainable speed for grease lubrication:20000 r/min; da max.:43.2 mm; Preload class D GD:720 N; Fatigue load limit Pu:0.38 kN; Calculation factor fHC:1; Mass bearing:0.15 kg; Static axial stiffness, preload class C:144 N/µm; Static axial stiffness, preload class D:190 N/µm; Calculation factor f:1.06; db max.:43.2 mm; Calculation factor (single, tandem) Y2:0.87; ra max.:1 mm; D:62 mm; |
| BA190-4 DB NSK Angular contact ball bearing | Cap bolt:5/8-11 UNC; H1:125.425 mm; R1:73.025 mm; Housing:SSAFS 026 KA; Stabilizing ring:2 x 38151-26; H:244.475 mm; P150°:48 kN; P180°:57.4 kN; Initial grease fill:232.47 g; Cap bolt recommended tightening torque:298.3 N·m; A1:120.65 mm; H2:52.388 mm; R2:31.75 mm; Pa:20.2 kN; Da:200 mm; ba:51.594 mm; P120°:52.5 kN; PG:1/4 NPT; RG:3/8 NPT; Mass pillow block:52.2 kg; |
| 203TFX01 NSK Thrust Tapered Roller Bearing | Basic Dynamic Radial Load Rating C:66000 N; d:55.000 mm; Sealed Speed Rating n3:4300 rpm; B:33.30 mm; Accessories:Shield & Seal; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:76500 N; Grease Speed Rating n1:4300 rpm; D:100.0000 mm; Fillet Radius ra:1.50 mm; |
| 523TFV01 NSK Thrust Tapered Roller Bearing | J min.:441.325 mm; P150°:78.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Da:289.999 mm; Housing:SAF 532; PG:1/4 NPT; P60°:226 kN; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Stabilizing ring:SR-32-0; L:558.8 mm; H2:66.675 mm; N1:28.575 mm; R1:104.775 mm; Mass pillow block:96.3 kg; Taconite seal:TER 131; RG:3/4 NPT; Initial grease fill:793.8 g; J max.:488.95 mm; |
| B290-52 NSK Angular contact ball bearing | Basic Static Radial Load Rating Co:122000 N; Basic Dynamic Radial Load Rating C:138000 N; D:140.0000 mm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.10 mm; B:58.70 mm; d:65.000 mm; Grease Speed Rating n1:3200 rpm; |
| BT190-1 DF NSK Angular contact ball bearing | B:24.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; D:145.0000 mm; Basic Dynamic Radial Load Rating C:63700 N; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; d:95.000 mm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals; |
| BT290-2 DB NSK Angular contact ball bearing | PosiTrac Plus contact element (dc shaft position):B10724-106; PosiTrac Plus contact element (db shaft position):B10724-117; P90°:81.4 kN; Ca:55.804 mm; N1:25.4 mm; P120°:50.7 kN; ba:38.894 mm; A2:155.575 mm; P150°:46.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Labyrinth ring (dc shaft position):LOR 106; P180°:55.6 kN; Max. speed for PosiTrac Plus seal:1350 r/min; |
| 7052BX DB NSK Angular contact ball bearing | D2:55.57 mm; d2:43.7 mm; Fatigue load limit Pu:0.4 kN; Static axial stiffness, preload class C:64 N/µm; Preload class D GD:480 N; db min.:39.6 mm; Basic static load rating C0:9.5 kN; Calculation factor f2D:1.09; B:14 mm; d1:43.7 mm; Preload class C GC:240 N; Static axial stiffness, preload class D:90 N/µm; Attainable speed for grease lubrication:24000 r/min; Calculation factor f2C:1.05; |