| BT380-1 DB NSK Angular contact ball bearing | H:182.166 mm; J1:53.975 mm; Cap bolt recommended tightening torque:149.1 N·m; Housing:FSAF 517; Stabilizing ring:SR-17-14; A1:88.9 mm; Mass pillow block:17.9 kg; h:34.925 mm; RG:3/8 NPT; P180°:25.4 kN; Labyrinth ring:2 x LOR 51; S:4.763 mm; Pa:9.25 kN; P60°:61.4 kN; J max.:279.4 mm; da:71.438 mm; Da:150 mm; R1:53.975 mm; Ca:45.796 mm; P150°:20.9 kN; |
| 800TFX01 NSK Thrust Tapered Roller Bearing | dn:74.5 mm; Calculation factor f1:1; Static axial stiffness, preload class B:84 N/µm; D:90 mm; C2:2.5 mm; Preload class B GB:266 N; rb max.:0.3 mm; C3:2 mm; Basic dynamic load rating C:16.5 kN; Preload class C GC:532 N; Calculation factor f:1.19; Ball diameter Dw:7.938 mm; Calculation factor f2C:1.09; Calculation factor f2A:1; Attainable speed for grease lubrication:24000 r/min; Db max.:88 mm; |
| B725-1 NSK Angular contact ball bearing | H:65 mm; Mass bearing (including seat washer where applicable):19.5 kg; Basic static load rating C0:1460 kN; Minimum load factor A:9.3; Da max.:395 mm; D1 ≈:370 mm; da min.:409 mm; Limiting speed:110 r/min; ra max.:1 mm; Reference speed:750 r/min; d1 ≈:440 mm; r1,2 min.:1.1 mm; Fatigue load limit Pu:27 kN; d:366 mm; Basic dynamic load rating C:296 kN; D:440 mm; |
| BA220-1 DF NSK Angular contact ball bearing | B:85.725 mm; Attachment bolt diameter G:15.875 mm; da:61.913 mm; Limiting speed:3100 r/min; A:69.85 mm; J:136.525 mm; N1:17.462 mm; s:31.75 mm; A6:25.4 mm; A1:88.106 mm; a:2.381 mm; d2:101.6 mm; Basic dynamic load rating C:148 kN; Mass bearing unit:7.85 kg; S:0.794 mm; A5:34.131 mm; L:174.625 mm; |
| 407TFX01 NSK Thrust Tapered Roller Bearing | Mass adapter sleeve assembly:25 kg; d:260 mm; Threads per inch:6; G:258.877 mm; d3 max.:309.702 mm; B1:222.606 mm; B5:44.704 mm; d1:228.6 mm; Sleeve:S 152x9; Hydraulic nut:HMVC 52E; B:35.966 mm; |
| BA160-7 DF NSK Angular contact ball bearing | C:12 mm; Static (Coa):26.1 kN; rs (min):1 mm; B:14 mm; Dynamic (Ca):25.1 kN; T:15.25 mm; a:11 mm; r2s (min):0.3 mm; Pu:3.180 kN; d2:20 mm; r1s (min):1 mm; D:47 mm; |
| BT200-1E DF NSK Angular contact ball bearing | P150°:48 kN; Initial grease fill:181.44 g; End plug (suffix Y):EPR 14; P60°:141 kN; P180°:57.4 kN; Da:180 mm; R2:30.163 mm; Taconite seal:TER 112; Cap bolt, SAE grade:8; R1:65.088 mm; H2:44.45 mm; Housing:SSAFS 024 KA; Stabilizing ring:2 x 38151-24; L:387.35 mm; ba:46.831 mm; A2:222.25 mm; Mass pillow block:39.5 kg; P120°:52.5 kN; RG:3/8 NPT; H1:114.3 mm; |
| 220TFX01 NSK Thrust Tapered Roller Bearing | Da:160 mm; Max. speed for PosiTrac Plus seal:1800 r/min; Initial grease fill:141.75 g; A1:98.425 mm; P180°:58.7 kN; Cap bolt:1/2-13 UNC; Labyrinth ring:2 x LOR 187; P150°:48 kN; H:196.85 mm; A2:149.225 mm; Mass pillow block:31.3 kg; End plug (suffix Y):EPR 11; P120°:53.4 kN; R1:60.325 mm; PosiTrac Plus contact element:2 x B10724-188; Stabilizing ring:SR-18-15; da:82.55 mm; Cap bolt recommended tightening torque:149.1 N·m; |
| 533TFX01 NSK Thrust Tapered Roller Bearing | P180°:84.5 kN; End plug (suffix Y):EPR 13; P120°:73.8 kN; Appropriate attachment bolt size G:0.875 in; H1:152.4 mm; P60°:189 kN; Initial grease fill:382.73 g; R2:36.513 mm; ba:63.5 mm; Pa:26.7 kN; Mass pillow block:69.3 kg; Ca:89.789 mm; Labyrinth ring:2 x LOR 107; R1:79.375 mm; S:4.763 mm; L:466.725 mm; da:96.838 mm; J1:82.55 mm; J max.:406.4 mm; P150°:68.1 kN; |
| BT240-1 DB NSK Angular contact ball bearing | d2:90 mm; rs (min):3 mm; b:12 mm; Dynamic (Ca):233 kN; F:115 mm; B:43 mm; E:165 mm; s:2 mm; r1s (min):3 mm; d2 (max):126.5 mm; Static (Coa):242 kN; D:190 mm; Pu:26.540 kN; b1:21 mm; |