| 7 0849 Rollix Slewing Ring Bearings | r1 min.:4 mm; Bore Diameter (mm):170; S:4,3 mm; r4 min.:4 mm; F:207 mm; B2:12 mm; Basic dynamic load rating (C):676 kN; C:52 mm; d:170 mm; Bearing number:NJ234-E-MPA+HJ234-E; B3:20 mm; Outer Diameter (mm):310; D:310 mm; r2 min.:4 mm; Size (mm):170x310x52; d1:220,8 mm; r3 min.:4 mm; Width (mm):52; D1:268,55 mm; Weight:19,9 Kg; |
| 11.40.2915.001.41.1502 Standard 5 Slewing Ring Bearings | d:40 mm; D:55 mm; C:30 mm; Basic dynamic load rating (C):52 kN; Bearing number:NKI40/30-TN-XL; Weight:0,216 Kg; Width (mm):30; Bore Diameter (mm):40; Basic static load rating (C0):103 kN; r min.:0,3 mm; S:1 mm; Fw:45 mm; B:30 mm; Reference speed:6 500 r/min; Size (mm):40x55x30; Outer Diameter (mm):55; Fatigue load limit (Pu):19,1; |
| 23 0741 01 Rollix Slewing Ring Bearings | Shaft Dia., Nominal (d):0.5000; Flange Radius (rfl):0.040; Bearing Length, Nominal (B):0.375; ID Chamfer Length (Ci):0.014; OD Chamfer Length (Co):0.023; Bearing Length Tolerance (B tol.) - +.010 / -0.010:+.010 / 0.010; Flange Thickness (Sfl):0.048; Bore Diameter (mm):12,7; Housing Bore Dia. (Dh) - 0.5941:0.5934; Flange Dia. (Dfl pm 0.5):0.810; Bearing Type:flanged; Shaft Size (ds) - 0.499:0.498; ID Chamfer Angle (B deg.):30; |
| 6 2002 Rollix Slewing Ring Bearings | Width (mm):7; Size (mm):25x37x7; d:25 mm; Bearing number:6805-2RS C3; D:37 mm; Outer Diameter (mm):37; B:7 mm; Bore Diameter (mm):25; |
| 33 0741 01 Rollix Slewing Ring Bearings | Pre Install Clearance Min:0.040 mm; Shaft Size Type:Metric; Weight:15.0 lb; Dimension L Exp:3.32 in; Grease Lubrication - T Seal:3200 rpm; Dimension E:4.50 in; Eng Internal Radial Clearance - Max:0.0026; Dimension K:1.13 in; Full Timken Part Number:QMFY11J055SB; Shaft Tolerance:0.0015 in; e - Geometry Factor:0.23; Housing Style:Round Flange; Dimension S:3.12 in; Dimension N:2.440 in; Oil Lubrication - T Seal:3800 rpm; |
| 121.45.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Bolt Qty:4; Material :Cast Iron; H:177 mm; G:M16; Housing Mass:9.70 Kg; Lockwasher:MB13; Housing:FSNT 516-613; End Cover2:EC516-613; Adapter Sleeve1:H2313; Locknut:KM13; C0 Static Load Rating:371; C1 Dynamic Load Rating:361; H2:32.0 mm; Bearing:22313K; L:315.00 mm; Max Grease Speed:3800; A:120.00 mm; Seal:VR613; J2:288 mm; N:18 mm; |
| 38 0841 01 Rollix Slewing Ring Bearings | B - Cone Width:0.8660 in; R - Cone Backface To Clear Radius1:0.09 in; Cg - Geometry Factor11:0.0984; G1 - Heat Generation Factor (Roller-Raceway)10:56; C1 - Dynamic Radial Rating (1 million revolutions)5:22200 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:5760 lbf; C1 - Cup Flange Width:0.1870 in; Cone Part Number:399A; db - Cone Backface Backing Diameter:3.07 in; Aa - Cage-Cone Backface Clearance:0.05 in; |
| 36 0641 01 Rollix Slewing Ring Bearings | d:48,412 mm; B:29,37 mm; Basic dynamic load rating (C):115 kN; a:3,8 mm; Width (mm):30,162; Bore Diameter (mm):48,412; Bearing number:HM804848A/10; D:95,25 mm; Size (mm):48.412x95.25x30.162; (Grease) Lubrication Speed:4000 r/min; Outer Diameter (mm):95,25; C:23,02 mm; T:30,162 mm; Weight:0,95 Kg; Basic static load rating (C0):157 kN; |
| 22 0941 01 Rollix Slewing Ring Bearings | (Grease) Lubrication Speed:5700 r/min; (Oil) Lubrication Speed:9800 r/min; Ew:54 mm; Basic dynamic load rating (C):29,3 kN; Width (mm):20; Basic static load rating (C0):57,3 kN; Weight:0,054 Kg; Outer Diameter (mm):54; Size (mm):48x54x20; Bearing number:48R5420-1; B:20 mm; Fw:48 mm; Bore Diameter (mm):48; |
| 28 1091 01 Rollix Slewing Ring Bearings | Bore Diameter (mm):15; α:25 ° / Angle; C0r:990 N / Static load; a:10 mm; d:15 mm; da:19 mm / Tolerance: h; Width (mm):9; ra max:0,3 mm; Cr:3250 N / Dynamic loa; Da:29 mm / Tolerance: H; nG Fett:80000 1/min / Limiti; rmin:0,3 mm; Size (mm):15x32x9; Outer Diameter (mm):32; D:32 mm; Bearing number:HCS7002-E-T-P4S; B:9 mm; m:0,035 kg / Weight; |